***** Guitar Project Jigs, Tools & Techniques Online Resources Archives OLF Video Page Library of plans MP3 Library Inlay Class
Offical Luthiers Forum





And our community proudly sponsored by:

RC Tonewoods | Stewart MacDonald | LuthiersForum
TasmanianTonewoods | OLF | OLF MERCH
Luthier Suppliers | Pacific Coast Woods | ELEVATE
OLF X | Tasmanian Acoustic Tonewood | Luthiers Forum Store!
Luthiers Forum | OLF Facebook | AVAIL SPACE
OLF | Alaska Specialty Woods | A.Hix Tonewood
Duke of Pearl | Birkonium CNC | Space




Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Sun Aug 24, 2025 1:05 pm


Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 
  Print view Previous topic | Next topic 
Author Message
gorjan
PostPosted: Mon May 13, 2013 5:29 am 
Offline
Mahogany
Mahogany

Joined: Wed Apr 18, 2012 5:14 am
Posts: 63
First name: Gorjan
Last Name: Stojanovski
City: Skopje
Zip/Postal Code: 1000
Country: Macedonia
Focus: Build
Status: Amateur
I doubt that the 17 USD stewmac are different than the 5-10 USD ebay tuners... You know stewmac's overpricing policies :)

My suggestion is getting some rubner tuners... the cheapest on their site (the ones without decorative elements and engravings) are 16 EUR including ADV. I am not aware if they have a minimum order though. Many builders have even compared them to the schallers and other low-mid priced 50-80 USD tuners performance vise.
Top
 Profile  
 
mkellyvrod
PostPosted: Mon May 13, 2013 5:44 am 
Offline
Contributing Member
Contributing Member

Joined: Thu Apr 19, 2012 11:10 am
Posts: 522
First name: Martin
Last Name: Kelly
City: Tampa
State: FL
Zip/Postal Code: 33634
Country: USA
Focus: Build
Status: Amateur
+1 on the Rubner Tuners; can get the most economical ones for around $45
Top
 Profile  
 
fric
PostPosted: Mon May 13, 2013 6:57 am 
Offline
Cocobolo
Cocobolo

Joined: Fri Sep 18, 2009 3:11 am
Posts: 140
State: Serbia
Status: Semi-pro
try gotoh also...
Top
 Profile  
 
Michael.N.
PostPosted: Mon May 13, 2013 7:03 am 
Offline
Koa
Koa

Joined: Thu Sep 10, 2009 4:01 pm
Posts: 1887
Location: UK
I've tried the cheapest Rubners. Hmmm, they work. Just about all that can be said of them. I suppose you shouldn't expect too much at that price point.
Anyone tried the Der Jung tuners made in Taiwan?
Top
 Profile  
 
Arnt Rian
PostPosted: Mon May 13, 2013 7:26 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Aug 26, 2005 5:49 pm
Posts: 2915
Location: Norway
I've used some of the $10 or so tuners from eBay, perfectly adequate for a "cheap student guitar", if its about as bad as I suspect...

_________________
Rian Gitar og Mandolin
Top
 Profile  
 
senunkan
PostPosted: Mon May 13, 2013 8:16 am 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Wed Jul 04, 2007 5:07 pm
Posts: 206
Location: Singapore
First name: Sen
Last Name: Goh
Country: Singapore
Focus: Build
Status: Amateur
I have one set of the Der Jung tuners fitted on my Yamaha guitar.
The worm gear is not as smooth as the better tuners but so far it works just fine and holds the tuning pretty well.

_________________
-----
Sen CL Goh
http://senguitar.blogspot.com
Top
 Profile  
 
douglas ingram
PostPosted: Mon May 13, 2013 8:20 am 
Offline
Koa
Koa
User avatar

Joined: Wed Sep 26, 2007 12:55 am
Posts: 1505
Location: Lorette, Manitoba, Canada
First name: Douglas
Last Name: Ingram
City: Lorette
State: Manitoba
Country: Canada
Focus: Build
I've tried some of the cheap Asian tuners as well as the economy Rubner tuners. The Rubners are clearly better for not much more money. The Asians are OK for a cheap guitar and at least as good as what would have been originally been on it.

_________________
Expectation is the source of all misery; comparison the thief of joy.
http://redrivercanoe.ca/
Top
 Profile  
 
Mike Collins
PostPosted: Mon May 13, 2013 2:36 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Mar 06, 2006 10:10 pm
Posts: 2485
Location: Argyle New York
First name: Mike/Mikey/Michael/hey you!
Last Name: Collins
City: Argyle
State: New York
Zip/Postal Code: 12809
Country: U.S.A. /America-yea!!
Focus: Build
Status: Professional
Believe it or not Grover makes a very
good tuner for cheap.
They have tension screws & work great!

Try the 304C or the 304G-chrome or gold are what
the C & G mean.
go to -
http://www.tamarkincompany.net

They also wholesale cases!!
Ask for John!

Mike

_________________
Mike Collins
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 10 posts ] 

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours


Who is online

Users browsing this forum: DennisK and 9 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com